Twice Shell

[ EDITING: stornvme.inf ]

;
; Copyright (c) Microsoft Corporation, 2012
;

[Version]
Signature   = "$WINDOWS NT$"
Class       = SCSIAdapter
ClassGUID   = {4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider    = %MSFT%
PnpLockdown = 1
DriverVer = 06/21/2006,10.0.17763.8880

[SourceDisksNames]
;3426 = windows cd
1 = %DiskName%,,,

[SourceDisksFiles]
;stornvme.sys = 3426
stornvme.sys = 1

[DestinationDirs]
; DIRID_DRIVERS
DefaultDestDir = 12

[ControlFlags]
BasicDriverOk = *
ExcludeFromSelect = *

[Manufacturer]
%MS-NVME% = NVME, NTamd64

[NVME.NTamd64]
%PCI\CC_010802.DeviceDesc% = Stornvme_Inst, PCI\CC_010802

[Stornvme_Inst]
CopyFiles = Stornvme_copyfiles
AddPowerSetting = NVMePowerSetting1,NVMePowerSetting2,NVMePowerSetting3,NVMePowerSetting4

[Stornvme_copyfiles]
stornvme.sys,,,0x100

[Stornvme_Inst.HW]
AddReg = Stornvme_Inst_HW_AddReg

[Stornvme_Inst_HW_AddReg]
; registry values related to MSI support
HKR, Interrupt Management, 0x00000010
HKR, Interrupt Management\MessageSignaledInterruptProperties, 0x00000010
HKR, Interrupt Management\Affinity Policy, 0x00000010

;
; The MSISupported entry determines whether the device supports MSIs. Set it to 1 to enable MSI support.
;
HKR, Interrupt Management\MessageSignaledInterruptProperties, MSISupported,       %REG_DWORD%,   1

;
; The MessageNumberLimit entry specifies the maximum number of MSIs to allocate. 
; For PCI 2.2, MessageNumberLimit must be 1, 2, 4, 8, or 16. For PCI 3.0, MessageNumberLimit can be any number up to 2,048.
; Set it to 65 so that 64 IO Queues and 1 Admin Queue can have different messages.
; Note that this number should be increased to "Processor Count + 1" if the driver runs on machine with more processors.
;
HKR, Interrupt Management\MessageSignaledInterruptProperties, MessageNumberLimit, %REG_DWORD%,   65

;
; Make sure all processor in group are used to serve interrupt from this device. IrqPolicySpreadMessagesAcrossAllProcessors (5)
;
HKR, Interrupt Management\Affinity Policy, DevicePolicy,   %REG_DWORD%, 5

;
; Specifies that the device's interrupts are of high priority. This setting is appropriate for devices that require low latency. IrqPriorityHigh (3)
;
HKR, Interrupt Management\Affinity Policy, DevicePriority, %REG_DWORD%, 3

;
; Allow interrupts on processors beyond group 0. (e.g. might be in a single group other than 0)
;
HKR, Interrupt Management\Affinity Policy, GroupPolicy, %REG_DWORD%, 1

[Stornvme_Inst.Services]
AddService = stornvme, %SPSVCINST_ASSOCSERVICE%, Stornvme_Service_Inst, Stornvme_EventLog_Inst

[Stornvme_Service_Inst]
DisplayName    = %StorNVMe_ServiceDesc%
ServiceType    = %SERVICE_KERNEL_DRIVER%
StartType      = %SERVICE_BOOT_START%
ErrorControl   = %SERVICE_ERROR_CRITICAL%
ServiceBinary  = %12%\stornvme.sys
LoadOrderGroup = SCSI Miniport

AddReg         = nvme_registry_values
AddReg         = nvme_registry_device_specific_values

[nvme_registry_values]
HKR, "Parameters\PnpInterface", "5", %REG_DWORD%, 0x00000001

; NOTE: bustype 0x11 is value of BusTypeNVMe
HKR, "Parameters", "BusType", %REG_DWORD%, 0x00000011

; Default timeout value 10 seconds
HKR, "Parameters", "IoTimeoutValue", %REG_DWORD%, 0x0000000A

; Default DMAR settings 2, where 2 = opt in, but only for external hot-plug devices
HKR, "Parameters", "DmaRemappingCompatible", %REG_DWORD%, 2
HKR, "Parameters", "DmaRemappingOnHiberPath", %REG_DWORD%, 1

[nvme_registry_device_specific_values]
HKR, "Parameters\Device", "IoStripeAlignment", %REG_MULTI_SZ_APPEND%, "VEN_8086&DEV_0953&REV_?? 128"
HKR, "Parameters\Device", "IoStripeAlignment", %REG_MULTI_SZ_APPEND%, "VEN_8086&DEV_0984&REV_?? 128"
HKR, "Parameters\Device", "IoStripeAlignment", %REG_MULTI_SZ_APPEND%, "VEN_8086&DEV_0A53&REV_?? 128"
HKR, "Parameters\Device", "IoStripeAlignment", %REG_MULTI_SZ_APPEND%, "VEN_8086&DEV_0A54&REV_?? 128"
HKR, "Parameters\Device", "IoStripeAlignment", %REG_MULTI_SZ_APPEND%, "VEN_8086&DEV_0A55&REV_?? 128"

[Stornvme_EventLog_Inst]
AddReg = Stornvme_EventLog_AddReg

[Stornvme_EventLog_AddReg]
HKR,, EventMessageFile, %REG_EXPAND_SZ%, "%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,, TypesSupported,   %REG_DWORD%,     7

[NVMePowerSetting1]
; Disk subgroup
Subgroup = {0012ee47-9041-4b5d-9b77-535fba8b1442}
; Primary NVMe Power State Transition Latency Tolerance (ms)
Setting =  {FC95AF4D-40E7-4B6D-835A-56D131DBC80E}, %NVMePowerLatencyToleranceName1%, %NVMePowerLatencyToleranceDesc1%,,0x00000001
; Range 0 to 1 minute (unit: ms)
ValueRange = 0, 60000, 1, %Milliseconds%

; High Performance
Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 0, 0
Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 1, 10
; Balanced
Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 0, 15
Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 1, 50
; Power Saving
Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 0, 100
Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 1, 200

[NVMePowerSetting2]
; Disk subgroup
Subgroup = {0012ee47-9041-4b5d-9b77-535fba8b1442}
; Primary NVMe Idle Timeout (ms)
Setting =  {D639518A-E56D-4345-8AF2-B9F32FB26109}, %NVMeIdleTimeoutName1%, %NVMeIdleTimeoutDesc1%,,0x00000001
; Range 0 to 1 minute (unit: ms)
ValueRange = 0, 60000, 1, %Milliseconds%

; High Performance
Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 0, 200
Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 1, 200
; Balanced
Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 0, 200
Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 1, 100
; Power Saving
Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 0, 100
Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 1, 100

[NVMePowerSetting3]
; Disk subgroup
Subgroup = {0012ee47-9041-4b5d-9b77-535fba8b1442}
; Secondary NVMe Power State Transition Latency Tolerance (ms)
Setting =  {DBC9E238-6DE9-49E3-92CD-8C2B4946B472}, %NVMePowerLatencyToleranceName2%, %NVMePowerLatencyToleranceDesc2%,,0x00000001
; Range 0 to 1 minute (unit: ms)
ValueRange = 0, 60000, 1, %Milliseconds%

; High Performance
Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 0, 0
Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 1, 0
; Balanced
Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 0, 100
Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 1, 100
; Power Saving
Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 0, 200
Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 1, 200

[NVMePowerSetting4]
; Disk subgroup
Subgroup = {0012ee47-9041-4b5d-9b77-535fba8b1442}
; Secondary NVMe Idle Timeout (ms)
Setting =  {D3D55EFD-C1FF-424E-9DC3-441BE7833010}, %NVMeIdleTimeoutName2%, %NVMeIdleTimeoutDesc2%,,0x00000001
; Range 0 to 1 minute (unit: ms)
ValueRange = 0, 60000, 1, %Milliseconds%

; High Performance
Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 0, 2000
Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 1, 2000
; Balanced
Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 0, 2000
Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 1, 1000
; Power Saving
Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 0, 1000
Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 1, 1000

;********************************************************
[Strings]
;Localizable
DiskName                    = "Microsoft Standard NVM Express Driver"
MSFT                        = "Microsoft"
MS-NVME                     = "Standard NVM Express Controller"
PCI\CC_010802.DeviceDesc    = "Standard NVM Express Controller"
Milliseconds                = "milliseconds"
StorNVMe_ServiceDesc        = "Microsoft Standard NVM Express Driver"
NVMePowerLatencyToleranceName1 = "Primary NVMe Power State Transition Latency Tolerance"
NVMePowerLatencyToleranceDesc1 = "When the NVMe device has been idle for a certain amount of time, transition to the lowest non-operational power state whose ENLAT+EXLAT value is less than or equal to the value specified by this setting."
NVMeIdleTimeoutName1         = "Primary NVMe Idle Timeout"
NVMeIdleTimeoutDesc1         = "Specifies the amount of time the NVMe device must be idle before transitioning to the primary non-operational power state."
NVMePowerLatencyToleranceName2 = "Secondary NVMe Power State Transition Latency Tolerance"
NVMePowerLatencyToleranceDesc2 = "After the NVMe device has been in the primary non-operational power state for a certain amount of time, transition to the lowest non-operational power state whose ENLAT+EXLAT value is less than or equal to the value specified by this setting."
NVMeIdleTimeoutName2         = "Secondary NVMe Idle Timeout"
NVMeIdleTimeoutDesc2         = "Specifies the amount of time the NVMe device must be in the primary non-operational power state before transitioning to the secondary non-operational power state."

;*******************************************
;Non-localizable
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START     = 0
SERVICE_ERROR_NORMAL   = 1
SERVICE_ERROR_CRITICAL = 3
REG_EXPAND_SZ          = 0x00020000
REG_DWORD              = 0x00010001
REG_MULTI_SZ           = 0x00010000
REG_MULTI_SZ_APPEND    = 0x00010008

[ CLOSE ]

Name	Size	Attr	Date	Action
[FILE] sceregvl.inf	30.90 KB	---A	26-06-10 09:10	DL REN ATTR DEL
[FILE] scmbus.inf	3.41 KB	---A	26-06-10 09:09	DL REN ATTR DEL
[FILE] scmbus.PNF	8.05 KB	---A	26-08-21 16:35	DL REN ATTR DEL
[FILE] scmvolume.inf	1.44 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] scrawpdo.inf	1.61 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] scsidev.inf	56.94 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] scunknown.inf	1.45 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] sdbus.inf	39.63 KB	---A	26-06-10 09:09	DL REN ATTR DEL
[FILE] SDFLauncher.inf	2.42 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] SDFRd.inf	1.86 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] SDFRd.PNF	6.14 KB	---A	22-02-27 13:41	DL REN ATTR DEL
[FILE] sdstor.inf	4.58 KB	---A	26-08-12 09:09	DL REN ATTR DEL
[FILE] sdstor.PNF	9.09 KB	---A	26-08-21 16:35	DL REN ATTR DEL
[FILE] secrecs.inf	18.24 KB	---A	26-06-10 09:10	DL REN ATTR DEL
[FILE] SensorsAlsDriver.inf	7.95 KB	---A	22-02-27 14:59	DL REN ATTR DEL
[FILE] SensorsHidClassDriver.inf	14.49 KB	---A	22-12-19 21:37	DL REN ATTR DEL
[FILE] SensorsServiceDriver.inf	5.07 KB	---A	22-02-27 14:59	DL REN ATTR DEL
[FILE] setupapi.dev.20250327_123817.log	4.00 MB	---A	25-03-27 12:38	DL REN ATTR DEL
[FILE] setupapi.dev.20250919_105602.log	4.00 MB	---A	25-09-19 10:56	DL REN ATTR DEL
[FILE] setupapi.dev.20260114_172334.log	6.90 MB	---A	26-01-14 17:23	DL REN ATTR DEL
[FILE] setupapi.dev.20260520_100249.log	4.00 MB	---A	26-05-20 10:02	DL REN ATTR DEL
[FILE] setupapi.dev.log	3.82 MB	---A	26-09-08 17:54	DL REN ATTR DEL
[FILE] sisraid2.inf	4.79 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] sisraid4.inf	3.63 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] SmartSAMD.inf	8.47 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] smrdisk.inf	1.41 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] smrvolume.inf	1.44 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] spaceport.inf	2.78 KB	---A	26-08-12 09:09	DL REN ATTR DEL
[FILE] spaceport.PNF	7.16 KB	---A	26-08-12 17:31	DL REN ATTR DEL
[FILE] stexstor.inf	18.31 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] sti.inf	13.81 KB	---A	22-02-27 14:59	DL REN ATTR DEL
[FILE] stornvme.inf	17.85 KB	---A	26-06-10 09:09	DL REN ATTR DEL
[FILE] stornvme.PNF	18.96 KB	---A	26-08-21 16:35	DL REN ATTR DEL
[FILE] storufs.inf	14.63 KB	---A	26-06-10 09:09	DL REN ATTR DEL
[FILE] storufs.PNF	18.78 KB	---A	26-08-21 16:35	DL REN ATTR DEL
[FILE] swenum.inf	3.12 KB	---A	26-06-10 09:09	DL REN ATTR DEL
[FILE] swenum.PNF	7.17 KB	---A	26-06-11 09:53	DL REN ATTR DEL
[FILE] tape.inf	79.45 KB	---A	26-06-10 09:09	DL REN ATTR DEL
[FILE] tdibth.inf	8.61 KB	---A	26-07-15 09:11	DL REN ATTR DEL
[FILE] tdibth.PNF	11.46 KB	---A	26-08-21 16:35	DL REN ATTR DEL
[FILE] termkbd.inf	3.02 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] termkbd.PNF	7.35 KB	---A	22-02-27 13:00	DL REN ATTR DEL
[FILE] termmou.inf	2.90 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] termmou.PNF	7.18 KB	---A	22-02-27 13:00	DL REN ATTR DEL
[FILE] tpm.inf	11.15 KB	---A	26-08-12 09:09	DL REN ATTR DEL
[FILE] tpm.PNF	13.11 KB	---A	26-08-21 16:35	DL REN ATTR DEL
[FILE] tpmvsc.inf	5.56 KB	---A	19-09-07 05:49	DL REN ATTR DEL
[FILE] transfercable.inf	5.65 KB	---A	18-09-15 12:41	DL REN ATTR DEL
[FILE] TSGenericUSBDriver.inf	4.90 KB	---A	22-02-27 14:59	DL REN ATTR DEL
[FILE] TSGenericUSBDriver.PNF	8.30 KB	---A	22-02-27 15:57	DL REN ATTR DEL

TWICE

[ EDITING: stornvme.inf ]