[Strings.0409]
; Localizable Strings
V_MCHP="Microchip Technology Inc."
MSFT = "Microsoft"
LAN9500.DeviceDesc          = "LAN9500 USB 2.0 to Ethernet 10/100 Adapter"
LAN9505.DeviceDesc          = "LAN9505 USB 2.0 to Ethernet 10/100 Adapter"
LAN9E00.DeviceDesc          = "LAN9500A USB 2.0 to Ethernet 10/100 Adapter"
LAN9E01.DeviceDesc          = "LAN9505A USB 2.0 to Ethernet 10/100 Adapter"
LANEC00.DeviceDesc          = "LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter"
LAN9900.DeviceDesc          = "LAN9500 USB 2.0 to Ethernet 10/100 Adapter (SAL10)"
LAN9901.DeviceDesc          = "LAN9505 USB 2.0 to Ethernet 10/100 Adapter (SAL10)"
LAN9902.DeviceDesc          = "LAN9500A USB 2.0 to Ethernet 10/100 Adapter (SAL10)"
LAN9903.DeviceDesc          = "LAN9505A USB 2.0 to Ethernet 10/100 Adapter (SAL10)"
LAN9904.DeviceDesc          = "LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter (SAL10)"
LAN9905.DeviceDesc          = "LAN9500A USB 2.0 to Ethernet 10/100 Adapter (HAL)"
LAN9906.DeviceDesc          = "LAN9505A USB 2.0 to Ethernet 10/100 Adapter (HAL)"
LAN9E08.DeviceDesc          = "LAN89530 USB 2.0 to Ethernet 10/100 Adapter"
LAN9E09.DeviceDesc          = "LAN89530 USB 2.0 to Ethernet 10/100 Adapter"
LAN9730.DeviceDesc          = "LAN9730 USB 2.0 to Ethernet 10/100 Adapter"
LAN9735.DeviceDesc          = "LAN9730 USB 2.0 to Ethernet 10/100 Adapter"
LAN9530.DeviceDesc          = "LAN9530 USB 2.0 to Ethernet 10/100 Adapter"
LAN9535.DeviceDesc          = "LAN9530 USB 2.0 to Ethernet 10/100 Adapter"


LAN9500.PackageDesc.ntx64   = "LAN9500 USB 2.0 to Ethernet 10/100 Adapter x64 Driver"
LAN9500.Service.DispName    = "LAN9500 USB 2.0 to Ethernet 10/100 Adapter Service"
MCHP_DISK_NAME="LAN9500 USB to Ethernet Driver Files"

;Parameters and values
FlowControl         = "Flow Control"
Disabled            = "Disabled"
Tx_Enabled          = "Tx Enabled"
Rx_Enabled          = "Rx Enabled"
Rx_And_Tx_Enabled   = "Rx & Tx Enabled"

SpeedDuplex         = "Speed & Duplex"
SpeedDuplex_AutoNeg = "Auto Negotiation"
SpeedDuplex_10HD    = "10 Mbps Half Duplex"
SpeedDuplex_10FD    = "10 Mbps Full Duplex"
SpeedDuplex_100HD   = "100 Mbps Half Duplex"
SpeedDuplex_100FD   = "100 Mbps Full Duplex"

NetAddr         = "Network Address"

PriorityAndVlan = "Priority & VLAN"
PVDisabled      = "Priority & VLAN Disabled"
PVEnabled       = "Priority & VLAN Enabled"
VlanID          = "VLAN ID"

USBBwMode       = "USB Bandwidth Usage Mode"
USBBwMaxTput    = "Maximum Throughput"
USBBwFriendly   = "Sharing Friendly"
USBBwAutomatic  = "Automatic"

EDPD            = "Energy Detect Power Down"
EDPDOFF         = "Disabled"
EDPDON          = "Enabled"

AutoMdix        = "Auto Mdix"
AMDIXOn         = "ON"
AMDIXOff-Swap   = "OFF / Crossed"
AMDIXOff-Normal = "OFF / Straight"
AMDIXHwStrap    = "HW Controlled"

AutoMdixMode    = "Auto Mdix Mode"
AMDIXModeAuto   = "Automatic ON/OFF"
AMDIXModeOn8023 = "ON with 802.3 timing"
AMDIXModeOnXtnd = "ON with Extended timing"

SSuspend        = "Selective Suspend"
SSEnable        = "Enabled"
SSDisable       = "Disabled"

SSIdleTimeout   = "Selective Suspend Idle Timeout"

WakePattern     = "Wake on pattern match"
WakeMagicPkt    = "Wake on magic packet"
WakeDisable     = "Disabled"
WakeEnable      = "Enabled"