[Strings.0409]
V_MCHP="Microchip Technology Inc."
MSFT = "Microsoft"
LAN7800.DeviceDesc          = "LAN7800 USB 3.0 to Ethernet 10/100/1000 Adapter"
LAN7801.DeviceDesc          = "LAN7801 USB 3.0 to Ethernet 10/100/1000 Adapter"
LAN780A.DeviceDesc          = "LAN780A USB 3.0 to Ethernet 10/100/1000 Adapter"
LAN7850.DeviceDesc          = "LAN7850 USB 2.0/HSIC to Ethernet 10/100/1000 Adapter"

LAN7800.PackageDesc.ntx64   = "LAN78xx USB to Ethernet Adapter x64 Driver"
LAN7800.Service.DispName    = "LAN78xx USB to Ethernet Adapter Service"
MCHP_DISK_NAME="LAN78xx USB to Ethernet Driver Files"

;Parameters and values
FlowControl     = "Flow Control"
Disabled            = "Disabled"
Tx_Enabled          = "Tx Enabled"
Rx_Enabled          = "Rx Enabled"
Rx_And_Tx_Enabled   = "Rx & Tx Enabled"

SpeedDuplex         = "Speed & Duplex"
SpeedDuplex_AutoNeg = "Auto Negotiation"
SpeedDuplex_10HD    = "10 Mbps Half Duplex"
SpeedDuplex_10FD    = "10 Mbps Full Duplex"
SpeedDuplex_100HD   = "100 Mbps Half Duplex"
SpeedDuplex_100FD   = "100 Mbps Full Duplex"
SpeedDuplex_1000FD  = "1.0 Gbps Full Duplex"

AdvCapa		= "Speed Duplex Autonegotiated Advertised Capabilities"
AdvCapa00	= "None"
AdvCapa01	= "10HD"
AdvCapa02	= "10FD"
AdvCapa03	= "10FD & 10HD"
AdvCapa04	= "100HD"
AdvCapa05	= "100HD & 10HD"
AdvCapa06	= "100HD & 10FD"
AdvCapa07	= "100HD, 10FD & 10HD"
AdvCapa08	= "100FD"
AdvCapa09	= "100FD & 10HD"
AdvCapa10	= "100FD & 10FD"
AdvCapa11	= "100FD, 10FD & 10HD"
AdvCapa12	= "100FD & 100HD"
AdvCapa13	= "100FD, 100HD & 10HD"
AdvCapa14	= "100FD, 100HD & 10FD"
AdvCapa15	= "100FD, 100HD, 10FD & 10HD"
AdvCapa16	= "1000FD"
AdvCapa17	= "1000FD & 10HD"
AdvCapa18	= "1000FD & 10FD"
AdvCapa19	= "1000FD, 10FD & 10HD"
AdvCapa20	= "1000FD & 100HD"
AdvCapa21	= "1000FD, 100HD & 10HD"
AdvCapa22	= "1000FD, 100HD & 10FD"
AdvCapa23	= "1000FD, 100HD, 10FD & 10HD"
AdvCapa24	= "1000FD & 100FD"
AdvCapa25	= "1000FD, 100FD & 10HD"
AdvCapa26	= "1000FD, 100FD & 10FD"
AdvCapa27	= "1000FD, 100FD, 10FD & 10HD"
AdvCapa28	= "1000FD, 100FD & 100HD"
AdvCapa29	= "1000FD, 100FD, 100HD & 10HD"
AdvCapa30	= "1000FD, 100FD, 100HD & 10FD"
AdvCapa31	= "All (1000FD, 100FD, 100HD, 10FD & 10HD)"

GigEMasterSlaveMode = "Gigabit Master Slave Mode"
GigEForceSlave      = "Force Slave Mode"
GigEForceMaster     = "Force Master Mode"
GigEAutoMS          = "Auto Detect"

NetAddr         = "Network Address"

PriorityAndVlan = "Packet Priority & VLAN"
PVDisabled      = "Packet Priority & VLAN Disabled"
PVEnabled       = "Packet Priority & VLAN Enabled"
VlanID          = "VLAN ID"

USBBwMode       = "USB Bandwidth Usage Mode"
USBBwMaxTput    = "Maximum Throughput"
USBBwFriendly   = "Sharing Friendly"
USBBwAutomatic  = "Automatic"

HardwareControl = "HW Controlled"

PMARPOffloadDesc = "PM ARP Offload"
PMNSOffloadDesc  = "PM NS Offload"
DeviceSleepOnDisconnectDesc = "Device Sleep On Disconnect"

LsoV1IPv4Desc   = "Large Send Offload V1 (IPv4)"
LsoV2IPv4Desc   = "Large Send Offload V2 (IPv4)"
LsoV2IPv6Desc   = "Large Send Offload V2 (IPv6)"

IpCsoIPv4        = "IPv4 Checksum Offload"
TcpCsoIPv4       = "TCP Checksum Offload (IPv4)"
TcpCsoIPv6       = "TCP Checksum Offload (IPv6)"
UdpCsoIPv4       = "UDP Checksum Offload (IPv4)"
UdpCsoIPv6       = "UDP Checksum Offload (IPv6)"

Enabled         = "Enabled"

TxEnabled       = "Tx Enabled"
RxEnabled       = "Rx Enabled"
TxRxEnabled     = "Rx & Tx Enabled"

JumboMtu        = "Jumbo Frame Size"

NetDetach       = "NetDetach"
NDModeOFF       = "Disabled"
NDModeON        = "Enabled"
NDModeAuto      = "Automatic"

EDPD            = "Power Down Phy on Link Down"
EDPDOFF         = "Disabled"
EDPDON          = "Enabled"

AutoMdix        = "Auto Mdix"
AMDIXOn         = "ON"
AMDIXOff-Swap   = "OFF / Crossed"
AMDIXOff-Normal = "OFF / Straight"

SSuspend        = "Selective Suspend"
SSEnable        = "Enabled"
SSDisable       = "Disabled"

SSIdleTimeout   = "Selective Suspend Idle Timeout"

WakePattern     = "Wake on pattern match"
WakeMagicPkt    = "Wake on magic packet"
WakeDisable     = "Disabled"
WakeEnable      = "Enabled"

LTMEnable       = "USB3 LTM"

LPMEnable       = "USB2 LPM"

EEE             = "Energy-Efficient Ethernet"